How to Use a Cocktail Smoke Bubble Gun Like a Pro: Step-by-Step Guide

August 15, 2026

Want to create that jaw-dropping, smoke-filled bubble that sits perfectly on top of a cocktail glass? A cocktail smoke bubble gun is the ultimate party trick and a must-have for home bartenders and high-end lounges alike.

However, if you are new to using a smoke gun, getting that perfect, long-lasting bubble can take a few insider tips. In this step-by-step guide, we will show you how to set up, operate, and troubleshoot your smoke bubble gun for flawless results every time.

What You Need Before You Start

Before firing up your smoke gun from Bon100, make sure you have your kit ready:

The Smoke Bubble Gun: Fully charged via USB (ensure at least 2000mAh battery capacity for optimal performance).
Wood Chips/Aromas: Natural fruit wood chips like apple, cherry, hickory, or oak.
Specialized Bubble Liquid: Always use food-grade, high-glycerin bubble formula (never use regular dish soap).
Your Cocktail: A properly chilled drink with a stable foam or rim to catch the bubble.

Step-by-Step Instructions

Step 1: Prime the Heating Chamber

Add a small pinch of your preferred wood chips into the stainless steel burning chamber of the gun. Do not overpack, as airflow is required to generate thick smoke.

Step 2: Apply the Bubble Solution

Dip the nozzle of the bubble gun lightly into your food-grade bubble liquid container, or use a small dipping tray to form a thin liquid film across the front nozzle ring.

Step 3: Ignite and Generate Smoke

Turn on the power switch to heat the chamber. Within seconds, rich, aromatic smoke will begin filling the internal tube. Gently pull the trigger or press the button to push the smoke forward.

Step 4: Form and Release the Bubble

Aim the nozzle directly above the rim of your cocktail glass. As the smoke expands into a bubble sphere, gently detach or tilt the gun away to let the bubble settle onto the drink's surface.
Pro Tip: For the best dramatic effect, let your guest pop the bubble themselves with a cocktail pick to release a burst of aroma!

3 Pro Tips for Long-Lasting Bubbles

Glassware Prep: Ensure the rim of your glass is clean and dry. A wet or sticky rim can cause the bubble to pop prematurely.
Clean the Atomizer: After 4-5 uses, wipe the heating core with a cotton swab dipped in warm water to prevent essential oil buildup.
Room Temperature: Avoid operating the gun in extremely drafty areas, as strong air currents will pop the smoke bubbles before they reach the glass.

Frequently Asked Questions (FAQ)

Q: Why is my smoke bubble gun popping instantly before forming a bubble?

A: This is usually due to a dirty nozzle or using the wrong bubble solution. Clean the nozzle ring with a damp cloth and ensure you are using a high-glycerin food-grade bubble liquid.